TM 1-4920-500-13&P
0006 00
CAUTION
Ensure power cable is not twisted, kinked, or placed over sharp rocks or
projections. Where possible, cable should not be routed through any deep
ground depressions where water may accumulate.
1
2
SSAE023
4. Extend power cable (2) between shop and PDB (1).
3
8
4
7
5
1
6
SSAE024
5. Remove protective dust cap (7) from "J1" receptacle (8) at power entry panel (3).
6. Remove protective dust cap (5) from female power connector (6).
7. Insert female power connector (6) into "J1" receptacle (8) and secure with lock ring (4).
0006 00-4