TM 10-5411-236-13&P
0053 00
18. Slide out insertion tool.
19. Following the same procedures in steps 13 and 17 to attach the wires marked L2 (5) to sockets of the
right female connector.
20. Reattach the female receptacles (9) to the distribution box (1) with the four #5 40 x 1/2-inch fillister
head screws, (8) hex head nuts (6) and lock washers (7) using a flat head screw driver and 5/16-inch
open end wrench.
21. Verify electrical continuity for "from to" path with an ohmmeter and remove tags.
2
1
3
4
6
5
7
8
9
END OF WORK PACKAGE
0053 00-8
