TM 10-5411-236-13&P
0056 00
REPLACE
1. Drill out rivets of the seal that is to be replaced using a 3/16-inch drill bit.
2. Use a pry bar or large scraper to remove old seals (1, 2, 3, 4, 5, 6, and 7).
3. Use a scraper to remove adhesive.
4. Using the appropriate seal replacement kit for the door of the seal to be replaced, apply SEALOK
sealant to the inside of the door seals.
5. Press door seals (1 through 4) in the proper position.
6. Using a 3/16-inch drill bit, drill holes through the seal and door edge. Four evenly distributed along
the top and bottom and eight along the two sides.
7. Attach using 3/16-inch closed end rivets.
8. Using tab adhesive attach the door seal corners (7).
9. Using tab adhesive attach the inside and outside corner tabs (5) and (6).
2
5
1
6
5
3
6
4
7
90-degree corner
45-degree corner
END OF WORK PACKAGE
0056 00-2