C. EXCITER COMMUTATOR AND ALTERNATOR
SLIPRING BRUSH HOLDERS AND MOUNTING
RING.
12 Washer
1 Nut
23 Spring
2 Screw
13 Nut
24 Washer
2.5 Screw
3 Bushing
14 Washer
15 Washer
26 I.ead
4 Arm
5 Spring
16 Screw
27 Screw
6 Washer
17 Spacer (shorn
28 Holder
29 Screw
18 Holder
7 Nut
19 Nut
30 Clamp
8 Screw
9 Bushing
20 Screw
31 Screw
32 Spacer (long)
10 Arm
21 Bushing
23 Arm
33 Ring
II Spring
and mounting rings. removal and installation, disassembly
and reassembly (sheet 3 of 3).
b. Disassembly. Refer to figure 3 - 1 4 and
3-16. Rotary Switch (10-Range)
disassemble rotary switch.
a. Removal.
c. Reassembly. R e f e r t o figure 3-14 and
(1) Remove four screws (fig. 2-3) and remove
reassemble rotary switch.
welder control panel.
d. Installation. Install in reverse o r d e r of
(2) Tag and disconnect electrical leads as
a above.
necessary.
(3) Remove four screws and lockwashers and
remove rotary switch.
3-18
