TM 9-243
USING A FLARING TOOL - Continued
7. Unscrew die block clamp screws (1) and open
die block clamp (2), releasing tubing (3).
8. Inspect flange (7) in tubing for cracks or breaks.
9. If a crack or break is detected, the tubing will
have to be cut and reflanged.
CARE OF TUBE CUTTERS AND FLARING TOOLS.
TUBE CUTTERS
FLARING TOOL
Keep cutting wheel clean and lightly oiled. If a reaming
device is mounted on the body of the cutter, keep it
retracted when not in use.
Store tube cutters on a rack or in a box.
Keep surfaces clean and lightly oiled. Close single
flaring tools and tighten cone into block for storing.
Keep double flaring tools in the case when not in use.
36-4
