TM 9-4933-223-13&P
MODIFICATION
NOTE
1
SIX 0.406-IN. (1.031-CM) DIAMETER
Modification procedures are
HOLES (1). Drill in table (2) using
used
only
for
initial
supports (3) placed flush with back of
installation or when the table
table as templates.
has been replaced with a new
unit. Install table in frame
before starting modification
procedures.
2
TWO 0.406-IN. (1.031-CM) DIAMETER HOLES (4). Drill in frame
(5) using long brace (6) and long brace (7) as templates.
3-165