TM 9-4933-223-13&P
3-22. ECU STOWING FRAME ASSEMBLY--WEBBING STRAP--MAINTENANCE INSTRUCTIONS
THIS TASK COVERS:
a. Inspection
c. Repair
b. Removal/disassembly
d. Reassembly/installation
INITIAL SETUP
Equipment Conditions
ECU removed from stowing frame assembly.
Special Tools
Armament repair shop set (SC 4933-95-CL-A21)
NOTE
There are two webbing straps for each ECU
References
stowing frame assembly. The following
procedures pertain to only one webbing
strap and must be repeated for the second
webbing strap.
INSPECTION
REMOVAL/DISASSEMBLY
1
TWO END CLIPS (1). Check to
ensure they are not missing or
loose.
2
STRAP (2). Check for frayed,
worn, or broken condition.
3
SLIDE (3). Check to ensure it is
not missing or broken.
1
SLIDE (1). Remove.
2
WEBBING STRAP (2). Remove from
ECU stowing frame assembly (3).
3-198