TM 9-4933-223-13&P
SERVICE
WARNING
Do not remove or install
the grounding rod when
shop set is energized.
2.
SCREW (2).
Remove from
plug
connector (3).
3.
TERMINAL LUG (4).
a.
Loosen screw (5) and remove
grounding rod wire (6).
1.
CABLE ADAPTER ASSEMBLY (1).
b.
Clean all parts with abrasive
Remove dirt with a polishing cloth (item
cloth (item 4, app D).
5, app D)
c.
Reinstall grounding rod wire
(6) and tighten screw (5).
REMOVAL
WARNING
De-energize shop set by
4.
TERMINAL LUG (4) AND SCREW (2)
placing circuit breaker
a.
Assemble.
on power distribution
b.
Reinstall on plug connector (3).
panel connected to power
source in OFF position
and then disconnect
120/208V cable assembly
from shelter.
3-215
