TM 9-4933-223-13&P
CONVERSION TABLE
NOTES
IN.
CM
3.69
9.37
1.
All dimensions shown are in inches. A dimension with a two-digit
decimal has a tolerance of 0.02 in. (0.05 cm) and a three-digit
21.12
53.64
decimal has a tolerance of 0.005 in. (0.013 cm).
32.62
82.85
30.50
77.47
1.06
2.69
2.
Fabricate from steel structural angle, NSN 9520-00-277-4912.
28.50
72.39
32.50
82.55
3.
Break all sharp edges and deburr all holes.
34.50
87.63
0.50
1.27
WARNING
0.203
0.52
Use only type 1.1.1 trichloroethane solvent. Never use
4.00
10.16
portable degreaser with solvent in it unless ventilation
2.13
5.41
fan is turned on. Breathing solvent vapors will cause
2.00
5.08
unconsciousness, prolonged skin contact with solvent will
0.188
0.48
cause irritation, and taking solvent internally will cause
0.390
0.99
vomiting.
4.
Degrease with type 1.1.1 trichloroethane (item 1, app D).
5.
Apply one coat primer coating (item 14, app D), followed by two
coats semigloss OD enamel (item 7, app D).
Change 1 E-37
