0038 00
TM 1-4920-441-13&P
INSTALLATION CONTINUED
6 DRAWER CABINET (C), 3 DRAWER CABINET (D), SHELF CABINET (D), AND 4 DRAWER CABINET (E)
(SC4920-99-CLA69) CONTINUED
a.
Position work surface (Figure 4, Item 10), inished side up, on top of four drawer cabinet (E) (Figure 4,
Item 11).
b.
Ensure work surface (Figure 4, Item 10) is lush with back and sides of four drawer cabinet (E) (Figure 4,
Item 11).
c.
On inside of four drawer cabinet (E) (Figure 4, Item 11), mark four hole placements in top of four drawer
cabinet (E) (Figure 4, Item 11) on non-inished side of work surface (Figure 4, Item 10).
d.
After four hole placement marks have been made, lip work surface (Figure 4, Item 10) over with non-
inished side up.
e.
On non-inished side of work surface (Figure 4, Item 10) at four marked hole placements, center punch
and drill four 5/16 inch holes to a depth of 3/4 inch.
11. Align bolt holes of work surface (Figure 4, Item 10) with bolt holes on top of four drawer cabinet (E) (Figure 4,
Item 11).
12. Install four lag bolts (Figure 4, Item 1), four lock washers (Figure 4, Item 2), and four lat washers (Figure 4,
Item 6) securing work surface (Figure 4, Item 10) to four drawer cabinet (E) (Figure 4, Item 11).
13. Install four bolts (Figure 4, Item 12), eight lat washers (Figure 4, Item 3), four lock washers (Figure 4, Item 2),
and four nuts (Figure 4, Item 14) attaching two cabinet brackets (Figure 4, Item 13) to six drawer cabinet (C)
(Figure 4, Item 7) and four drawer cabinet (E) (Figure 4, Item 11).
14. Install hardware attaching bench leg assembly (Figure 4, Item 4), six drawer cabinet (C) (Figure 4, Item 7)
with work surface (Figure 4, Item 5), three drawer cabinet (D) (Figure 4, Item 15), shelf cabinet (D) (Figure 4,
Item 9), four drawer cabinet (E) (Figure 4, Item 11) with work surface (Figure 4, Item 10) to shelter wall and
loor IAW WP 0039 00, Cabinets (C), (D) and (E) Hardware (SC4920-99-CLA69), REMOVAL.
15. Install drawers, slides, and shelves as necessary IAW Drawers, Slides, And Shelves, INSTALLATION.
16. Install kick plate IAW Kick Plate, INSTALLATION.
0038 00-8