SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
OPERATION UNDER USUAL CONDITIONS
Overloading overhead rack can cause damage to rack and HMMWV.
When stowing equipment on overhead rack, care must be taken not to overload. Overhead rack is not designed
to carry more than 500 pounds. Heavy items should be loaded toward rear, as much as possible. Insure that
equipment is secured to rack tie-down rings.
LEFT HAND AND RIGHT HAND SIDE BOX DOORS
Failure to use locking pins could allow door to fall, causing injury to personnel.
Each side box is equipped with a locking pin. When doors are opened, insert locking pin in door stay to secure
door in raised position.
OVERHEAD SLIDER DOOR
Disengage the slider door from latched position by forcefully pushing upward on the door. This will shift the door
into sliding position. The door slides toward the front of the HMMWV.
Close the slider door by sliding it to the rear of the HMMWV and pressing the door down into latched position.
Use the latches on the sides to lock the door down.
Secure stored equipment prior to moving SECM.
It is essential that heavy items be secured in place, prior to moving, when stored in main box. Movement of SECM
will cause shifting of items within this storage facility. Damage to stored items and to main box will result by loose
0005 00-1/(2 Blank)