TM 10-5411-236-13&P
0013 00
Table 1. Operator Troubleshooting (cont'd)
Malfunction
Test or inspection
Corrective action required
Inspect container door
threshold for dirt, gravel or
Clean as necessary. Lubricate (WP
14. Doors Leaking
other obstructions. Inspect
0017 00) as
required. (Refer to
work
door seals for proper
package 0051 00.)
lubrication.
Inspect for debris in the
15. Unable to Install Load
Clean as necessary. (Refer to WP
bottom load rail retainer
Constraint Bar.
boot.
Inspect to ensure all
Remove bolts. Using 2X4 or similar
securing bolts have been
object, tap upward on the drawer
16. Unable to Remove Drawer
removed. Check drawer
ledge until clear of vertical rack frame
Slide Ledge Assembly from
ledge position to ensure it is
Vertical Rack Frame.
clear of the vertical rack
00.)
stanchion windows.
Remove and reposition with all tabs
inside vertical rack frame windows
17. Unable to Install Drawer Slide
Inspect ledge tabs to ensure
and tap downward with a 2X4 or
Ledge Assembly on the Vertical
they are inside vertical rack
similar object until bolt holes are
Rack Frame.
frame windows.
aligned. (Refer to WP 0006 00, 0031
00.)
Inspect drawer locking
Position drawer locking handles into
handles to ensure they are
the unlocked position and extend
18. Unable to Open Drawer.
in the unlocked position.
outward. Clear obstruction and open.
Inspect for an obstruction
inside the drawer.
Pull back firmly on drawer to fully
extend and turn locking handles to
19. Drawer Does Not Lock in the
Inspect drawer to ensure
Fully Extended Position.
drawer is fully extended.
their locked position. (Refer to WP
Inspect drawer locking
Position handle in the open position
handle to ensure they are in
and push inward. Clear/remove the
20. Unable to Close Drawer.
the open position. Check for
an obstruction in the drawer.
0030 00.)
Inspect pallet locking rod to
ensure it is in the fully
Fully retract the pallet locking rod.
retracted position. Inspect
Untangle net and straps and continue
21. Unable to Insert a Pallet.
pallet and pallet ledge area
inserting pallet. (Refer to WP 0006
to ensure nets or straps on
00.)
the pallet are not hung up on
the pallet ledge.
Inspect pallet locking rod to
ensure it is in the fully
Fully retract the pallet locking rod.
retracted position. Inspect
Untangle nets/straps and continue
22. Unable to Remove a Pallet.
pallet and pallet ledge area
to ensure nets or straps on
00, 0032 00.)
the pallet are not hung up on
the pallet ledge.
0013 00-3