This requires an accurate calibration weight.
Clear the pan and depress the tare button for at least three seconds until the calibration weight appears in the
Place the calibration weight on the pan.
Now the weight unit symbol appears and a beeper sounds to signal completion of calibration.
You can lock both the external and the internal calibration function see Balance operating program. Both
functions are active whenever the balance operating program has been unlocked with the access switch.
In addition to grams, this balance gives you a variety of other international weight unit options to work with.
Select the weight unit you need from the table in the balance operating program, and set the appropriate code as
described in section Balance operating program.
Balance operating program.
The balance operating program permits adaption of your balance to ambient conditions at the point of use and
different weighing requirements, plus selection of various weight units. At the factory, we have set the codes for a
standard program, which is protected by a locking function to prevent accidental changes.
The code is the information carrier of the operating program. It consists of three digits: one each for the page, the
line and the word.
Access to the balance operating program:
Activate the ON/OFF button while at the same time depressing the tare bar.
- 7 -