TM 9-4933-223-13&P
1
BLIND INSERT (1).
a.
Clean with a wiping rag (item 15, app D) dipped in dry cleaning solvent (item 6,
b.
Install on hydraulic gun.
c.
Insert in 0.375-in. (0.953-cm) diameter hole (2) and set with hydraulic gun. (See
NOTE
Adhesive is a mixture of resin (item 3, app D) and hardener (item 3, app D);
mix according to vendor supplied information.
2
CAULK GUN (3).
a.
Fill with adhesive.
b.
insert into one 0.125-in. (0.318-cm) diameter hole (4).
c.
Release adhesive until it flows from the other 0.125-in. diameter hole (5).
3-147