TM 10-5411-236-13&P
OPERATOR AND UNIT MAINTENANCE
AUTHORIZED STOCKAGE LIST MOBILITY SYSTEM (ASLMS)
MODEL NUMBER FPU-8/12 PARTS (OD) P/N 15005002-001
MODEL NUMBER FPU-8/12 PARTS (DS) P/N 15005002-002
MODEL NUMBER FPU-8/12 BULK (OD) P/N 15005001-001
MODEL NUMBER FPU-8/12 BULK (DS) P/N 15005001-002
INTRODUCTION
INTRODUCTION
The malfunction/symptom index in WP 0012 00 is a quick reference for finding the troubleshooting
procedures. Associated with each symptom name is a table number representing the starting point in a
troubleshooting sequence contained in WP 0013 00. The troubleshooting index is broken down by
component. Find the component and malfunction/symptom, review the referenced table for the test or
inspection and perform the corrective action. This type of activity continues until successful fault isolation
is achieved.
Troubleshooting Procedures
The troubleshooting work package contains tables listing the malfunctions, checks or inspections, and
corrective actions required to return the equipment to normal operation. Perform the steps in the order
they appear in the tables.
The work package is headed by an initial setup. This setup outlines what is needed as well as the
conditions that must be met before starting the task. DO NOT START A TASK UNTIL:
You understand the task.
You understand what you are to do.
You understand what is needed to do the work.
You have the things you need.
This manual cannot list all malfunctions that may occur, or all tests, inspections and corrective actions. If
a malfunction is not listed or is not corrected by listed corrective actions, notify unit maintenance.
General Information
When troubleshooting the electrical system with power connected, place all switches and circuit breakers
in the OFF position. Ensure all switches and circuit breakers are identified as "in work" to prevent
accidental powering of equipment while servicing equipment in work. If any circuit breaker trips after it
has been reset, notify unit maintenance.
END OF WORK PACKAGE
0011 00-1/(2 Blank)