TB 9-3470-201-30
4.
Installation
twelve 5/32-in. flat washers (MS27183-
NOTE
43), and twelve #10 hex nuts
Hand blind riveter (5120-00-
973-0376) is used for in-
stalling blind rivet nuts in
walls of semitrailer.
Install blind rivet nuts in
accordance with MIL-N-47187.
00-725-3508) on semitrailer floor in
a. Mark and drill eight 0.25-in.
diameter holes in walls of semitrailer
base of the engine lathe as a template,
mark and drill four 0.41-in. diameter
eight blind rivet nuts S37B80 in
holes through the floor. Secure engine
holes. Secure four strap loops
lathe to floor using four 3/8- x 2-
(MS51939-3) to walls using eight
1/2-in. hex head capscrews (MS901725-
#1OXIL countersunk head machine
68), eight 13/32-in. flat washers
screws (MS35191-276) threaded into
(MS2718-14), four 3/8-in. lockwashers
blind rivet nuts.
(MS35338-46), and four 3/8-in. hex nuts
(MS51967-8).
b. Mark and drill thirty-six 0.25-
in. diameter holes in semitrailer
(2) Machine
tool attachment
floor, storage cabinet walls, and
grinding machine
storage cabinet tops in accordance with
to be secured to
the engine lathe's
cross slide with
T-bolts provided.
loops as follows:
(3) Position lathe accessory case
(1) Install four straps loops
on semitrailer floor in accordance with
(MS51939-3) in semitrailer floor using
eight #10 x 1-3/4-in. countersunk head
case as a template, mark and drill four
machine screws (MS35190-278), eight
0.34-in. diameter holes through the
5/32-in. flat washers (MS27183-6),
floor. Secure lathe accessory case to
the floor using four 5/16- x 3-in.
eight #10 hex nuts (MS35650-302).
machine bolts (MS90725-44), four
11/32-in. flat washers (MS27183-12),
(2) Install eight strap loops
four 5/16-in. lockwashers (MS35338-45),
(MS51939-3) on storage cabinet tops
and four 5/16-in. hex nuts (MS51967-5).
using sixteen #10 x 2-1/4-in. counter-
sunk head machine screws (MS35190-280),
(4) Secure wash pan (4940-00-795-
sixteen 5/32-in. flat washers (MS27183-
3595) to the semitrailer front wall
6), sixteen #10 lockwashers (MS35338-
using one 48-in. retaining strap
43), and sixteen #10 hex nuts
(7550588-3) in accordance with figure
(MS35650-302).
CAUTION
Remove storage cabinet
drawers adjacent to hole
555-8672) on semitrailer floor and
secure with one 48-in. retaining strap
(7550588-3) secured to the wall and
floor, and one 66-in. retaining strap
(3) Install six strap loops
(MS51939-3) on storage cabinet walls
(7550588-9) parallel to the wall in
using twelve #10 x 5/8-in. countersunk
head machine screws (MS35190-272),
9