TB 9-3470-209-30
General
WARNING
Drill bits can fracture or break dur-
a. Instructions contained in this
ing use. Wear safety glasses at all
bulletin are to be used as a guide for
times when drilling holes.
installation of welding field mainte-
nance shop equipment (NSN 3470-00-357-
CAUTION
7268) in one M35A2 cargo truck, unit 1
Special care should be exercised to
unit 2 (fig. 2).
avoid damage to electrical connectors,
wiring, or electrical equipment.
b. Slight variations to instal-
To preserve waterproof characteristics,
lation instructions may be made at the
precautions should be taken not to
discretion of the officer in charge.
puncture the outer skin when drilling
holes into the walls or floor of the
c. Complete lists of items con-
shop . Coat underside of vehicle body
tained in this shop are found in SC
with coating compound (UNDERCOATING TT-
3470-95-CL-A08 .
C-520, NSN 8030-00-221-1834) where
mounting hardware projects through
d. Personnel performing this in-
floor.
stallation should have a practical
knowledge of electricity.
Location of Equipment
e. Items not mentioned in this
a. Locations of equipment installed or
bulletin that may be components of this
stowed in units 1 and 2 are shown in figures
shop may be stowed in cabinets and
1 thru 13.
drawers or secured in such a manner as
to avoid damage in transit.
(1) Refer to table 1 for hardware
required for installation.
f. All dimensions, fastener sizes,
and hardware sizes are in inches.
(2) Refer to table 2 for components to
to be mounted.
When entering shop, curbside is
g.
at right and roadside is at left.
(3) Refer to table 3 for electrical
components to be mounted.
Warnings and Cautions
b. Refer to table 4 for standard con-
WARNING
version chart.
All electrically-powered tools
and equipment must be grounded
prior to use.
Extinguish all smoking materials
and do not permit open flame or
sparks in the vacinity of flam-
mable gases or liquids.
Mounting Hardware
Application
Qty
Size and description
MS/part no.
Pipe vise
3
5/16-in. Flat Washer
AN970-5
4
Machinist's vise
1/2-in. Flat Washer
AN970-8
Power cable assemblies
28
12.00-in. Tiedown Strap
MS3367-3-0
