TB 9-4910-746-30
CAUTION
1. General
Special care should be
a The instructions contained in this
exercised to avoid damage to
electrical connectors,
bulletin are to be used as advice and
wiring, or electrical equip-
guidance for installation of field
ment.
maintenance automotive maintenance and
repair shop equipment (NSN 4910-00-754-
0706) in one M109A3 shop van truck,
To preserve waterproof
unit one; one M35A2 cargo truck, unit
characteristics, precautions
two; and two M105A2 cargo trailers,
should be taken not to
units three and four.
puncture the outer skin when
drilling holes in the walls
b. Slight variations to the instal-
or floor of the shop. Coat
lation instructions may be made in
underside of vehicle body
accordance with FM 55-30 at the discre-
with coating compound (UNDER-
tion of the officer in charge.
COATING TT-C-520, NSN 8030-
00-221-1834) where mounting
c. Complete lists of items con-
hardware projects through
floor.
tained In this shop are found in SC
4910-95-CL-A62.
Location of Equipment
d. Personnel performing this in-
a. Locations of equipment to be
stallation should have a practical
knowledge of electricity.
installed or stowed in units 1 thru 4
are referenced in figures 1 thru 18.
e. Items not mentioned in this
bulletin, that may be components of
(1) Refer to table 1 for hardware
required for installation.
this shop, may be stowed in cabinets
and drawers or secured in such a manner
(2) Refer to table 2 for com-
as to avoid damage in transit.
ponents to be mounted.
f. All dimensions, fastener sizes,
and hardware sizes are in inches.
(3) Refer to table 3 for elec-
trical components to be mounted.
When entering shop, curbside is
g.
at right and roadside is at left.
b. Refer to table 4 for standard
conversion chart.
WARNING
All electrically powered
tools and equipment must be
grounded prior to use.
