TM 1-4920-433-13&P
0054 00
REMOVAL
NON-METALLIC HOSE AND FITTINGS REMOVE
Figure 2.
Hose Clamp Removal.
1.
Remove bolts (Figure 2, Item 2) and loop clamps (Figure 2, Item 3) from non-metallic hose (Figure 2, Item 1).
Figure 3.
Hose Replacement.
2.
Using a utility knife (Figure 3, Item 3), slit non-metallic hose (Figure 3, Item 4) approximately 1 1/2 inches
lengthwise from protective cap (Figure 3, Item 2) to end of itting (Figure 3, Item 1).
0054 00-3