TM 1-4920-435-13&P
0018 00
POSITIONING BAND SAW FOR OPERATIONAL MODE - CONTINUED
1.
Remove four bolts (Figure 1, Item 5), four lock washers (Figure 1, Item 4), and four lat washers (Figure 1,
Item 3 ) from two band saw loor brackets (Figure 1, Item 2) and store in secure storage location.
2.
Position band saw (Figure 1, Item 1) at operational mode location.
3.
Remove four setscrews (WP 0077 00, Figure 2, Item 18 or 19) from shelter BII box and install into empty loor
inserts.
END OF WORK PACKAGE
0018 00-3/4 blank