• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
OPERATION UNDER USUAL CONDITIONS: SITING REQUIREMENTS
Figure 2. Leveling Support Jack Install.

Maintenance Manual For Engine Shop Part No. 1035258 And Part No. Sc4920-99-Cla60
Page Navigation
  15    16    17    18    19  20  21    22    23    24    25  
img
.
0005 00
TM 1-4920-436-13&P
ASSEMBLY AND PREPARATION FOR USE
WARNING
Four personnel are required to perform all of the following procedures. Failure to observe
warning could result in SERIOUS INJURY to personnel.
NOTE
Each shelter is equipped with six container jacks. Four leveling support jack assemblies
are used on ixed side to lift and level shelter and two hinged jack assemblies are used on
expanded side to level hinged loor after expansion.
Refer to WP 0029 00 for unusual ground conditions.
Figure 1.
Leveling Support Jack.
1.
Remove four leveling support jack assemblies (Figure 1, Item 2) from inside of personnel and right cargo
doors (Figure 1, Item 1) by turning locking handle (Figure 1, Item 5) to loosen jack attachment (Figure 1, Item
3) and removing safety pin (Figure 1, Item 4).
2.
Position leveling support jack assemblies at each corner of shelter.
0005 00-2


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.