0016 00
TM 1-4920-440-13&P
POSITIONING CLERK DESK FOR OPERATIONAL MODE
Figure 1.
Unsecure Clerk Desk.
1.
Remove two bolts (Figure 1, Item 2), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
4) from two clerk desk right front and left rear leg brackets (Figure 1, Item 6) attached to shelter loor.
2.
Remove two bolts (Figure 1, Item 2) , two lock washers (Figure 1, Item 3), and two lat washers (Figure 1,
Item 4) from two clerk desk right rear and left front leg brackets (Figure 1, Item 5) attached to shelter loor.
3.
Position clerk desk (Figure 1, Item 1) in preferred location.
4.
Repeat Steps 1 through 3 for remaining three clerk desks.
5.
Remove sixteen setscrews (WP 0068 00, Figure 2, Item 18 or 19) from shelter BII box (WP 0002 00, Figure
2, Item 5 or Figure 3, Item 6) and install into empty loor inserts (WP 0047 00, Figure 2).
END OF WORK PACKAGE
0016 00-2