TM 1-4920-440-13&P
0035 00
UNUSUAL ENVIRONMENT/WEATHER CONTINUED
OPERATION IN HIGH WINDS CONTINUED
NOTE
A minimum of a quarter turn is required to remove maximum holding power.
Figure 4.
Securing Loops and Clamps.
5.
Insert driving rod through loop and pull up sharply to ensure anchor is set into ground.
NOTE
When moving shelter, disassemble storm coniguration kit and cut cable as close to ground as
possible. Discard cable components. Retain the two tie-down rings and store in shelter Basic
Issue Items (BII) box (WP 0002 00, Figure 2, Item 5 or Figure 3, Item 6)
Figure 5.
Attaching Loops and Clamps.
6.
Remove clamp, loop cable at six places (two with tie-down rings) as shown.
7.
Replace clamp and tighten clamp nuts.
0035 00-5