TM 1-4920-440-13&P
OPERATOR INSTRUCTIONS
PRODUCTION/QUALITY CONTROL SHOP
OPERATION UNDER UNUSUAL CONDITIONS
INITIAL SETUP:
References
Tools and Special Tools
General Mechanics Tool Kit
(WP 0063 00, Table 2, Item 104 )
Equipment Condition
Personnel Required
Functional
CMF 15 Series (6)
UNUSUAL ENVIRONMENT/WEATHER
OPERATION IN RAIN AND/OR MUD
1.
When setting up shelter, place wood planks or boards under each jack pad to increase bearing area.
2.
Provide adequate drainage ditch to prevent standing water around shelter area.
3.
Check ISO and hinged jack assemblies frequently for sinking and level shelter as required by adjusting ISO
and hinged jack assemblies.
4.
Close and secure all doors in shelter.
5.
Check seals for proper placement and compression.
OPERATION IN SNOW, ICE OR EXTREME COLD
WARNING
In extreme cold, do not touch metal parts with bare hands. Severe skin damage may result.
NOTE
Fluorescent lights have a delay time in coming on at temperatures of 0F and below.
1.
Frequently remove snow from roof with a soft bristle brush, broom, or equivalent.
2.
Remove ice from shelter before lowering hinged panels.
3.
Ensure ECUs are properly positioned.
4.
Keep all doors and vents closed.
0035 00-1