0005 00
TM 1-4920-441-13&P
SECURING SHELTER
1.
Remove four removable latches from shelter BII box.
2.
Install two latches on hinged sidewall and one latch on each hinged end wall. Do not engage at this point.
3.
Compress seals by irst engaging sixteen non-removable latches between hinged sidewall, end wall, roof,
and loor.
4.
Engage four removable latches.
5.
Visually check to make sure all seals are properly compressed.
Figure 16.
Remove Sidewall Support Braces.
6.
Remove sidewall support braces (Figure 16, Item 2) from brace cups marked "A" (Figure 16, Item 3) on
hinged loor and sidewall behind support cable (Figure 16, Item 1) and store in shelter BII box .
END OF WORK PACKAGE
0005 00-16
