TM 1-4920-441-13&P
0017 00
POSITIONING THREE DRAWER CABINET (G) AND SIX DRAWER
CABINET (H) FOR OPERATIONAL MODE - CONTINUED
CAUTION
Do not use installed equipment as lifting points to relocate cabinet.
NOTE
This cabinet assembly is identiied as three drawer cabinet (G) and six drawer cabinet (H) for
the 1036058 coniguration. For the SC4920-99- CLA69 coniguration, the three drawer cabinet
is identiied as three drawer cabinet (F) and the six drawer cabinet is identiied as six drawer
cabinet (G). The assemblies are identical in design and moving procedures.
1.
Remove two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 5), two lat washers (Figure 1, Item 6)
and cabinet bracket (Figure 1, Item 3) from three drawer cabinet (G) (Figure 1, Item 1).
2.
Remove two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 5), two lat washers (Figure 1, Item 6),
and cabinet bracket (Figure 1, Item 3) from six drawer cabinet (H) (Figure 1, Item 2).
3.
Store four bolts (Figure 1, Item 4), four lock washers (Figure 1, Item 5), and four lat washers (Figure 1, Item
6) in secure storage location.
4.
Position Cabinets (Figure 1, Item 1 and 2) at operational mode location.
5.
Remove four setscrews (WP 0064 00, Figure 2, Item 18 or 19) from shelter BII box and install into empty loor
inserts.
END OF WORK PACKAGE
0017 00-3/4 blank
