0049 00
TM 1-4920-441-13&P
INSPECTION OF INSTALLED ITEMS
WATER FEED-THRU CONNECTOR ASSEMBLY
Figure 1.
Inspect Water Feed-Thru Connector Assembly.
1.
Inspect condition of threads on both ends of water feed-thru connector (Figure 1, Item 2). Replace as
necessary
2.
Ensure that protective dust caps (Figure 1, Item 1) are attached.
3.
Ensure that weld on connector is not cracked or broken. If defective, replace.
REMOVAL
WATER FEED-THRU CONNECTOR ASSEMBLY
Figure 2.
Disassembly of Water Feed-thru Connector Assembly.
1.
Have assistant hold nut (Figure 2, Item 5) and washer (Figure 2, Item 3) inside shelter.
2.
Remove nuts (Figure 2, Item 5), lat washers (Figure 2, Item 3), lock washers (Figure 2, Item 4), and screws
(Figure 2, Item 2), releasing water feed-thru connector assembly (Figure 2, Item 1).
0049 00-2