TM 1-4920-450-13&P
3-13. Water/Oil Separator Fittings and Air Hose - Replace (Cont)
3-13
REPLACE AIR HOSE
1.
2.
Remove both loop clamps (1) from defective
hose (2).
Slit hose (2) lengthwise from protective cap (3) to
end of fitting (4) (approximately 1 1/2 inches) with
knife.
3. Bend hose (2) back over fitting (4) and snap off with
quick tug.
4. Repeat Steps 2 and 3 at other end of hose.
GO TO NEXT PAGE
3-14
