TM 1-4920-500-13&P
0019 00
7 DRAWER CABINET D
5
3
5
4
1
3 4
3
6
10
7
5
9
2
3
4
8
3
4
6
SSAE126
7
Inspect
1. Inspect 7 drawer cabinet D (7) for loose bolts (5).
2. If necessary, torque bolts (4) 160-190 in. lbs.
3. If bolts (5) will not tighten follow procedures in WP 0038 00.
4. Inspect 7 drawer cabinet D (7) for damage that will deem cabinet non-operational.
5. Replace 7 drawer cabinet D (7) if deemed non-operational.
Remove
1. Remove five bolts (5), five lock washers (4), seven flat washers (3), and two nuts (6) attaching cabinet bracket
(2) to 7 drawer cabinet D (7) and floor.
2. Remove four bolts (5), four lock washers (4), eight flat washers (3), and four nuts (6) attaching 7 drawer
cabinet D (7) to 12 drawer cabinet E (1).
3. Remove four bolts (8), four lock washers, (4), and four flat washers (9) attaching 7 drawer cabinet D (7) to
work table top (10).
Install
1. Install four bolts (8), four lock washers (4), and four flat washers (9) attaching 7 drawer cabinet D (7) to work
table top (10).
2. Install four bolts (5), four lock washers (4), eight flat washers (3), and four nuts (6) attaching 7 drawer cabinet
D (7) to 12 drawer cabinet E (1).
3. Install five bolts (5), five lock washers (4), seven flat washers (3), and two nuts (6) attaching cabinet bracket
(2) to 7 drawer cabinet D (7) and floor.
4. Torque bolts (5) installed in wall or floor 160-190 in. lbs.
