TM 10-5411-236-13&P
0004 00
WARNING
Some HAZMATs may react negatively with other HAZMATs. The MSDS for each type of
hazardous material to be shipped must be referenced prior to shipment. All recommend
chemical compatibility and safety procedures must be followed. Be sure to use the
appropriate absorbent material inside the containers to absorb spills. All HAZMATs must
be double wrapped prior to shipment in lined HAZMAT storage pallets. Failure to do so
may result in a violent chemical reaction that could cause damage to pallets, ASLMS
cargo, hardware and injury or death to personnel.
There are two 8-inch deep HAZMAT secondary containment pallets with a corrosion resistant liner and
cargo net. There are sixteen 12-inch deep drawers, with adjustable dividers (adjustable in 2-inch
increments from front to back), six 2-inch and two 8-inch drawers with nylon cargo netting to secure
material. All drawers have a maximum capacity of 150 lbs.
8-INCH DEEP LINED
HAZMAT STORAGE
AREA
PALLET
ASLMS Storage/Shipping Modules
The FPU-8 Parts unit is equipped with four storage/shipping modules. Each module consists of one 4-
inch, three 6-inch, and one 8-inch deep drawer. The drawer compartments are provided with adjustable
dividers (adjustable in 2-inch increments from front to back). Maximum drawer capacity is 150 lbs. Top
basket has a bi-fold door and split adjustable shelves. All modules are designed to be interchangeable
and therefore may be inserted into any of the ASLMS containers equipped with the floor adapter plate.
Change 1
0004 00-2