TM 10-5411-236-13&P
0007 00
4. With the assistance of a ground guide, insert tines into module.
NOTE
Be sure to enter the forklift pockets with tines above the red handle.
5. Lift module directly upward maintaining a level position to a height just above the module receptacles
on the floor adapter plate.
6. Using ground guide, slowly back out paying close attention to the guide and the upper clearance
between the basket and container door cam keeper that protrudes downward from the top of the
container frame. The module may have to be raised or lowered during this process if the tilt is too far
forward or backward.
0007 00-3
Change 1
