TM 10-5411-236-13&P
0007 00
1.
Extend drawer to its full open position.
2.
Grasping the lid, slide outward to a distance so that hands can grasp both sides of lid beyond the
hinge point.
3.
Gasping both sides, remove lid by sliding outward until free of drawer.
4.
Fold and store in a safe place.
5.
To install, extend drawer to its full open position and lock.
6.
Grasp the lid to the rear of the hinge point with both hands.
7.
Align both sides of lid and drawer tracks and begin sliding inward.
8.
As hands approach front of drawer release and grasp front of lid.
9.
Continue to slide lid on to drawer being careful not to bind at the hinge joint.
10. Keeping fingers outboard of the lid and free of the cabinet hull, slide lid fully onto drawer.
11. Close drawer locks and push drawer inward to its closed position.
Attaching and Detaching Basket (Must be done with module removed from FPU)
WARNING
The baskets are heavy and awkward to handle by a single person. The adjustment of
these items requires two or more persons to move or install - lift with legs, not back, to
prevent injury. Failure to do so may result in serious back or other muscular skeletal
injuries. Use gloves when removing or replacing drawers.
1.
Remove the FPU-8 using procedures in this WP.
2.
Attach the basket to the module by sliding it into the tracks on top of the module base.
Change 1
0007 00-8