TM 10-5411-236-13&P
0047 00
Replace filter housing as follows:
1. Close vent cover (1) using red banded release handle (2).
2. Slide the two barrel bolts (3) on the filter-retaining lid (4) and remove.
3. Remove filter housing (5) by sliding upward.
4. Insert new filter housing (5) with filter (6).
5. Reinstall the filter-retaining lid (4). Push the barrel bolts (3) outward to lock the retaining lid in place.
6. Using the black reset handle (2) pull until the vent cover is set in the open position.
1
6
2
4
3
5
0047 00-3
