TM 10-5411-236-13&P
0048 00
6. Clean filter housing (3) as necessary.
7. Insert new filter media (6) with the yellow side facing to the inside of the container and the white side
facing towards the outside. The yellow side of media must be inserted facing the square holes of the
filter housing (3).
8. Reinstall the two bungee cords (5) into the filter housing (3).
9. Slide the filter housing (3) back into the ventilation system (4). Filter bungee cords must be facing
towards the outside of the container.
10. Reinstall the filter-retaining lid (2).
11. Pull the red handle (7) to release the cover plate to the closed position.
12. Pull the black pull handle (1) to place the vent cover (8) in the open position.
8
3
1
7
6
5
4
2
END OF WORK PACKAGE
0048 00-3/(4 Blank)
