TM 10-5411-236-13&P
DIRECT SUPPORT MAINTENANCE
AUTHORIZED STOCKAGE LIST MOBILITY SYSTEM (ASLMS)
MODEL NUMBER FPU-8/12 PARTS (OD) P/N 15005002-001
MODEL NUMBER FPU-8/12 PARTS (DS) P/N 15005002-002
MODEL NUMBER FPU-8/12 BULK (OD) P/N 15005001-001
MODEL NUMBER FPU-8/12 BULK (DS) P/N 15005001-002
DOOR ASSEMBLIES
ALIGN, REPLACE, REPAIR
INITIAL SETUP:
Material/Parts
References
Locktite 262 Red (Item 5, WP 0105 00)
Personnel Required
Equipment Condition
Two
Doors open. Pallets/drawers removed.
Tools
General Mechanic's Tool Kit (Item 4, WP 0063 00)
ALIGN
1
2
Align doors 2, 3, 8 and 9 as follows:
1. Ensure that the container is on a level surface.
2. Remove drawers/pallets directly behind the door to be aligned. See WP 0006 00.
3. With door in the open position loosen hinge bolts on the door using a 9/16-inch socket with ratchet
and wrench that the misaligned door is attached to. Do not loosen the bolts on the hinges that are on
the misaligned door.
4. Close the misaligned door, leaving the opposite door open to allow access for measurements.
5. Using a pry bar, center door with equal distance from top of door edge to header and bottom door
edge to threshold.
0051 00-1
Change 1