TM 5-3610-256-14
1-1.
SCOPE
Section I.
CHAPTER 1
INTRODUCTION
GENERAL INFORMATION
Type of Manual.
Operator’s, Organizational, Direct Suppert, and General Support Maintenance Manual.
Model Number and Equipment Name.
185.FL-M Reproduction Set, Diazon Process.
Purpose of Equipment.
Used for reproduction in the field of translucent material such as maps, blueprints, etc.
1-2.
MAINTENANCE FORMS AND RECORDS. Department of the Army forms and procedures used
for equipment maintenance will be those prescribed by DA PAM 738-750, The Army Maintenance
Management System (TAMMS).
1-3.
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR’s).
If your
Reproduction Set needs improvement, let us know. Send us an ElR. You, the user, are the only one who
can tell us what you don’t like about your equipment.
Let us know why you don’t like the design or
performance. Put it on an SF 368 (Quality Deficiency Report). Mail it to: Commander, U.S. Army Troop
Support Command (AMSTR-QX), 4300 Goodfellow Blvd., St. Louis, MO 63120-1798. We will send you a reply.
Section II. EQUIPMENT DESCRIPTION AND DATA
1-4.
EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES.
CHARACTERISTICS
Produces blue-line, black-line, or film diazo copies of original material.
CAPABILITIES AND FEATURES.
Uses diazo roll stock or cut sheets.
Copies on paper, film, or cloth diazo paper.
Prints blue- or black-line copies.
Ventless, sealed ammonia circulation system.
Forward and reverse feed control.
50/60 Hz input.
Hi/Off/Lo Lamp Switch.
14.1 DIFFERENCES BETWEEN MODELS.
There is only one model of the Diazo Process
Reproduction Set, Model 185.FL-M.
However, reproduction sets with serial numbers 334 and higher
have minor differences in configuration from those with serial numbers 333 and below. Where models
in the two different serial number ranges require different parts, TM 5-3610-256-24P will indicate which
part to order by serial number range.
Configuration differences between the two serial number ranges
are shown in paragraph 1-5.
Change 4
1-1
