TM 5-3610-256-14
CHAPTER 2
OPERATING INSTRUCTIONS
Page
Description and Use of Operator's Controls and lndicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Operation Under Usual Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Section I. DESCRIPTION AND USE OF OPERATOR’S CONTROLS AND INDICATORS
KEY
CONTROL OR INDICATOR
FUNCTION
1
Hi/Off/Lo Switch
Three-position switch
Hi: Used for printing material in medium
to fast range (blue-line or black-line paper).
Off: Turns off power to lamps, pump, and
drive motor. (Does not control heater.)
Lo: Used for slow-printing diazo material.
2
Speed Switch
Controls rate material passes past ultra-
violet lamps and through ammonia vapor
in developer.
3
Fwd/Rw Switch
Controls direction of roller travel.
Fwd: Draws material through machine.
Rev: Used to clear paper jams.
4
Paper Cutter
Used to cut rolled diazo paper from bulk roll.
5
Feed Switch
When actuated, turns on lamps, pump and drive motor.
Change 1
2-1
