TM 5-3610-256-14
CHAPTER 4
DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
Section I. LUBRICATION INSTRUCTIONS
LUBRICATION INSTRUCTIONS. Direct support lubrication instructions for the Reproduction
are found in Table 4-1. These instructions are mandatory and wilI be performed at the indicated
intervals.
4-2. TOOLS AND MATERIALS REQUIRED.
ITEM No.
1
ITEM
QUANTITY
Flat-Tipped
Screwdriver
1
Cross-Tipped Screwdriver
1
Sacket Head Wrench Set
1
Grease
ar
Table 4-1. Direct Support Lubrication Instructions
INTERVAL
6 months or 100 hours
of operation
ITEM TO BE LUBRICATED
PROCEDURE
DRIVE MOTOR
Unplug power cord before servicing
machine. Death or injury may resuIt
from failure to comply with this
warning.
a Power OFF.
b. Unplug power cord.
c. Remove screws from rear cover and remove cover.
d. Turn captive screw and remove left cover.
4-1
