Table I. Contents of Shop Set--Continued
Contract No-------------
5. Identification and Tabulated Data
Date manufactured- ------
a. Identification. The shop set has three identi-
Registration No. ---------
fication plates.
Serial No-----------------
(1) Corps of Engineers plate A. Located on
(3) Corps of Enginers plate A (Model CMU-5).
the left front of the body housing and speci-
Nomcnclaturc-
---------
Shop Equipment, Contact Main-
fies the nomenclature, stock number, manu-
tenance, Truck Mounted.
facturer, model, shipping dimensios and
Stock No.--------------- 4940-294-9518
weight, cubic feet, engine manufacturer,
Manufacturer- - - - - - Davey Compressor Co.
Model - - - - - - - - CMU-5
and engine model. The information listed
Length ----------------- 214 in.
on this plate will be found in tabulated
Width ------------------ 83 in.
data.
Height ------------------ 82 in.
(2) Welder identification plate. Located on the
Shipping weight --- --- -- 8,440 lb
Cube ------------------- 847 ft
Engine Manufacturer.. _
Dodge Division, Chrysler Motor
manufacturer, amperage l volts, model ,
Corp.
duty cycle and specification number. The
Engine Model
---
information listed on this plate will be
Engine Serial No. --------
found in tabulated data.
Contract No------------- 88CF48254-30
Date Manufactured ------
Registration No. ---
on the compressor motor and specifies the
Serial No----------------
cycles, amperage, revolutions per minute,
(4) Welder identification plate.
and temperature rise. The information
Manufacturer- ----------- Hobart Brothers Co.
listed on this plate will be found in tabu-
lated data.
Amperage ----------- 200
Volts --------------- 4 0
b. Tabulated Data.
M o d e l -------------- SMR-200
(1) General.
Duty cycle----------- 60 percent
Manufacturer- --- ----- --- Southwest Truck Body Co.
Specifications:
Model ------------------ SECM
Model SECM --- 3408
T y p e - - - - - - - - - - - - - - - - - - - Truck mounted M56B, 3/4 ton,
Model CMU-5-- 3741
4x4.
Motor:
Horsepower --------- 15
(2) Corps of Engineers plate A (Model SECM).
1,500-1,800
Revolutions per
Shop Equipment, Contact Main-
Nomenclature- --------
minute.
tenance, Truck Mounted.
P h a s e -------------- 3
Stock No---------------- 4940-294-9518
Cycles -------------- 50-60
Manufacturer ------------ Southwest Truck Body Co.
volts:
M o d e l - - - - - - - - - - - - - - - - - - SECM
Model SECM -- _ 208
L e n g t h - - - - - - - - - - - - - - - - 215 in. (inches)
Model CMU-5-- 240
Width ------------------ 82 1/2 in.
Amperage---------- 38
Height ------------------ 82 1/2 in.
Shipping weight-- ------- 8,400 lb (pounds)
C u b e - - - - - - - - - - - - - - - - - - 847 ft (feet)
Manufacturer -- ---------- Johnson Service Co.
Engine manufacturer - - - - - Dodge Division, Chrysler Motor
M o d e l s - - - - - - - - - - - - - - - - - MM60083HT
Corp.
MM60528JT
Engine model ----------- T-245
Engine serial No. --------
TAGO
5672-A
16