CHAPTER 1
INTRODUCTION
Section I. GENERAL
c. See
1-1. scope
TM 750-244-3, Procedures for
Destruction of Equipment to Prevent Enemy Use
These instructions are published for the use of the
(Mobility Equipment Command ) for destruction of
personnel to whom the Southwest Model SEORL
the shop truck.
Shop Set, Serial Number Range S-2-864 thru S-2-
866 and Model SEORLT Shop Set, Serial Number
1 - 3 . Reporting of Errors
R a n g e S-12-001 thru S-12-048 is issued. The
Report of errors, omissions, and recommendations
O r g a n i z a t i o n a l Maintenance Repair Parts and
for improving this publication by the individual
Special Tools List will be contained in TM 5-4940-
user is encouraged. Reports should be submitted on
225-20P.
DA Form 2028 Recommended, Changes to
Publications, and forwarded direct to Commanding
General, U. S. Army Mobility Equipment Com-
a. DA Forms and records used for equipment
m a n d , ATTN: AMSME-MPP, 4300 Goodfellow
maintenance will be only those prescribed in TM
B o u l e v a r d , St. Louis, Mo. 63120.
38-750.
b. See TM 740-90-1 for administrative storage of
the shop truck.
Section II. DESCRIPTION AND DATA
1-4. Description
the power take-off (P. T. O.) or by a 240-volt AC
external power source. When driven by the engine,
The Southwest Model SEORL and Model
it provides direct current for welding and alter.
SEORLT Shop Sets (fig. 1-1) are truck mounted
nating current for the shop set tools and equipment.
and contain tools and equipment that are used for
When driven by an external power source, the
maintenance and repair of equipment. The shop set
alternating current generator acts as a synchronous
is equipped with door's to provide easy access to the
motor and drives the d dynamotor-welder to provide
equipment in the set (fig. 1-2). A weather protected
direct current for welding. The external power is
work area is provided when the tent is installed (fig.
also utilized to operate the electrical tools and
equipment.
set, and can be driven by the truck's engine through
