Section XII. MAINTENANCE OF BODY COMPONENTS
This section provides removal and installation
4-40. General
procedures for the fixed components.
The shop set components are of two general types;
4 - 4 1 . Grinder
portable, and fixed. The portable contents are
stowed in drawers, cabinets, and other areas of the
a. Removal. Remove the grinder as illustrated in
shop set while the fixed contents are bolted or
otherwise secured to the cabinets, walls and floor.
b. Installation. Install the grinder as illustrated
in figure 4-17.
b. Installation.
(1) Place the milling and grinding attachment
a . Removal.
on the panel and secure with bolt (2) and nut (2).
(1) Remove screw (4) and remove milling and
(2) Place milling and grinding attachment
grinding attachment complete with panel.
with panel as shown in figure 4-18, and secure with
(2) Remove nut (2) and bolt (2) and remove
screw (4).
milling and grinding attachment from panel.
