TM 9-243
CARE OF INSERTED FACE HAMMERS
1.
Broken or chipped faces may be removed by
turning in a counterclockwise direction.
NOTE
Use a pair of pliers or a rag on
broken faces to prevent scraping
your hands.
2.
Wipe out face seat on holder with a clean rag.
Install new face by turning in a clockwise
direction.
3.
If holder is broken or cracked, remove both
faces by turning in a counterclockwise direction.
4.
Obtain a new holder and install faces by turning
in a clockwise direction.
REPLACING THE HANDLE
The above items are the basic materials required to replace the handle on a typical carpenter's hammer.
21-13