TM 9-243
USING A RIVET BUSTER CHISEL
The following procedures are designed for using a rivet
buster chisel.
1 Place cutting edge (1) of the chisel firmly against
the rivet shaft (2) between the head and the metal.
2 Grip the chisel firmly and strike chisel head (3) with
a machinist's or sledge hammer (4).
3 Continue striking chisel head until rivet head has
been cut off.
CARE OF CHISELS
1. Protect the cutting edges by installing protective
covers.
2. Store in racks or where they may not be chipped or
broken.
3. Lubricate with a light coat of oil before storing.
4. Regrind broken or chipped edges before using.
26-5/(26-6 blank)
