TM 9-243
USING A BENCH GRINDER - Continued
3 Position grinder where it will be used and tighten the
mounting clamp (1) to hold securely on the bench.
4
Loosen the wing nut (2) on the rest (3). Adjust the
rest (3). Tighten the wing nut (2).
5
Support the tool to be ground on the rest (3).
NOTE
Since user must use both hands to
hold tool to the wheel, another
person is required to turn the
handcrank in a counterclockwise
direction.
6
Rotate the handcrank and move the tool forward
until it makes contact with the wheel.
7
Move the tool back and forth across the abrasive
wheel face to be sure of an evenly ground surface.
29-4
