TM 9-243
USING A DIE AND DIESTOCK - Continued
10.
Clean threads (9) with a clean rag and check
with a screw pitch gage (10) before using.
11.
Disassemble die (3) and diestock (4) by
loosening setscrew (5). Wipe clean with a rag.
CARE OF TAPS
1.
Do not attempt to sharpen taps.
2.
Keep cutting edges lightly oiled.
3.
Wipe excess oil and metal shavings from tap
and tapwrench.
4.
Store them in a case or wrap individually in
cloths to protect cutting surfaces.
CARE OF DIES
1.
Do not attempt to sharpen dies.
2.
Keep
cutting
surfaces
clean
and
lightly
lubricated.
3.
Store in a case or wrap individually in cloths
where they will not come in contact with other
tools.
38-7/(38-8 blank)
