TM 9-243
USING THE ELECTRIC CHAIN SAW - Continued
1
Make sure power source is disconnected.
Before using, ensure that the chain teeth (1) are
in the proper position (saw should cut in
direction of arrow).
2
Check the teeth to make sure they are sharp
and undamaged.
3
Ensure that the work (2) is stationary and well
secured to prevent slippage or movement.
4
Connect chain saw to power source.
5
Stand to the left of the saw (3) with your left
hand on the front handle (4) and your right hand
on the rear handle (5).
NOTE
Reverse the position of the stance
and hands if left-handed.
6
With your weight evenly distributed, depress
trigger to start saw.
CAUTION
The saw chain should be at maxi-
mum
speed
before
contacting
working surface.
7
Cut with the spike bar (6) set firmly against the
wood and apply light pressure.
8
Continue to guide the chain saw through the
work until cut is completed.
52-11
