TM 9-4933-223-13&P
MODIFICATION
NOTE
Modification
of
the
electrical
installation is required only when
installing wiring in a new shelter
which has not previously been
modified.
The
modification
is
performed inside the circuit breaker
panel box PL1.
For clarity, wires not mentioned in
the text are not shown.
1. BLACK WIRE (1) FROM BLACKOUT LAMP (2).
Disconnect from switch S4(3).
2. WIRE (4) FROM CIRCUIT BREAKER CB4 (5) TO
SWITCH S1 (6). Remove.
3. WIRE (7) FROM CIRCUIT BREAKER CB6 (8) TO
SWITCH S2 (9). Remove.
4. WIRE (10) FROM CIRCUIT BREAKER CB8 (11) TO
SWITCH S3 (12). Remove.
5. WIRE (13) FROM CIRCUIT BREAKER CB9 (14) TO
SWITCH S4 (15). Remove.
3-63
