TM 9-4933-223-13&P
13-10. SHOP SET--ELECTRICAL INSTALLATION--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
NOTE
The following five procedures pertain
to wires no. 9, no. 10, and no. 11 if
initial installation or replacement of
complete harness assembly is required.
16 BLACK WIRE NO. 9 (43), WHITE WIRE NO. 10
(44), AND GREEN WIRE NO. 11 (45) IN CONDUIT
BOX J20 (34). Form 6-in. (15.24-cm) service loop
(46).
18
SERVICE LOOP (46) IN CONDUIT
BOX J20 (34).
a.
Cut in center.
b.
Strip insulation (48) back 0.5
in. (1.27 cm) from ends on all
cut wires.
c.
Install two lug terminals (49)
17
GREEN WIRE NO. 11 (45) IN "T"
on green wire no. 11 (50) and
CONDUIT BOX J21 (32). Form 6-
green wire no. 11 (51).
in. (15.24-cm) service loop (47).
3-70