TM 9-4933-223-13&P
3-10. SHOP SET--ELECTRICAL INSTALLATION--MAINTENANCE INSTRUCTIONS (cont)
TEST
1
With shop set de-energized and
WARNING
2
Connect
power
cable
and
power cable disconnected, test
Before energizing shop set, ensure
energize power source.
the entire electrical installation for
grounding rods are properly installed
open and short circuits with a
and connected at the power distribution 3
Test
the
entire
electrical
panel and at shelter.
installation for proper installation
3-11. SHOP SET--GROUNDING STUD--MAINTENANCE INSTRUCTIONS
THIS TASK COVERS:
a. Disassembly
d. Repair
b. Inspection
e. Reassembly
c. Service
INITIAL SETUP
General Safety Instructions
Special Tools
Armament repair shop set (SC 4933-95-CL-A21)
WARNING
Before beginning maintenance on the
Material s/Parts
grounding stud, de-energize the shop
Abrasive cloth (item 4, app D)
set by placing circuit breaker on
power distribution panel connected to
References
the power source in OFF position and
then disconnect 120/208V cable
assembly from shelter.
Equipment Conditions
Shop set must be de-energized.
3-86