TM 9-4933-223-13&P
13-11. SHOP SET--GROUNDING STUD--MAINTENANCE INSTRUCTIONS (cont)
INSPECTION
SERVICE
REPAIR
Inspect all parts for rust, corrosion, or
Replace any parts that are broken, cracked,
other defects.
or otherwise damaged in any way that would
prevent good electrical contact (app C).
NOTE
The grounding stud, mounted
NOTE
through the power input
For initial installation only, remove
Clean any rusted or corroded parts with
panel, is used to connect a
grounding stud furnished with shelter
an abrasive cloth (item 4, app D).
grounding rod on the exterior
and then proceed with reassembly
of the shelter for grounding
steps 1 thru 5.
the shop set electrical system
and the shelter itself.
REASSEMBLY
3
FLAT WASHER (1) AND NUT (2).
Install.
4
FLAT WASHER (1), GROUND WIRE (4),
LOCKWASHER (5), AND WINGNUT (6).
Install on exterior of shelter wall.
1
FLAT WASHER (1) AND NUT
(2). Install on stud (3).
2
STUD (3). Install.
3-88
